Home › Resources
Technical resources
Wire mesh and fencing resources
from the manufacturer
Weight calculators, specifications and buying guides from MM Industries, manufacturing wire mesh and fencing at our own plant in Raipur since 1995. Size, specify and budget your order before you request a quote.
ISO 9001:2015 certified plant · Wire MTC with every lot
On this page
Calculators
Calculators and tools
Theoretical weights for planning and for comparing quotes. Weldmesh is invoiced on its actual weighed quantity.
Weight calculator
Welded mesh weight calculator
Weight per sq ft, per sq m and per roll for any wire gauge and aperture, with a SWG to mm chart.
Open calculator →
Weight calculator
Chain link fence weight calculator
Roll weight and weight per running foot for 14 to 8 SWG wire and 25 to 100 mm mesh, with a SWG to mm chart.
Open calculator →
Planning tool
Boundary length calculator
Work out how much fencing your plot boundary needs before you order rolls.
Open calculator →
Buying guides
Buying and selection guides
Practical guides on choosing, specifying and maintaining wire mesh and fencing.
Buying guide
How to choose the best wire mesh fence
A buyer’s guide to choosing the right wire mesh fence for your site.
Read the guide →
Farm fencing
How to choose the right fencing wire for your farm
Which fencing wire suits which farm boundary, and what to check before you buy.
Read the guide →
Comparison
Concertina coil vs barbed wire
Barbed wire and concertina coil compared, to help you choose the right perimeter security.
Read the guide →
Construction
RCC and plastering wire mesh in modern construction
Why wire mesh is used in RCC and plastering work, the common mesh types and where each is used.
Read the guide →
Maintenance
10 smart tips to make your wire mesh fence last longer
Ten practical tips to extend the life of a wire mesh fence.
Read the guide →
Maintenance
Wire mesh fence painting guide
How painting a wire mesh fence protects it from rust and extends its life.
Read the guide →
Specifications
Specifications and standards
Standard manufacturing ranges for each product line. Other sizes are made to order against your drawing or tender specification.
IS 4948 · GI and MS
Welded wire mesh
1.6 to 4.0 mm wire, apertures from 25 × 25 to 150 × 150 mm, square or rectangular, in rolls and panels.
View specifications →
IS 2721 · GI or PVC coated
Chain link fence
2.0 to 4.0 mm wire (14 to 8 SWG), 25 to 100 mm mesh, roll heights from 3 to 6.56 ft.
View specifications →
GI
Knotted mesh (Rama Jali)
12 SWG as standard and 14 SWG for lighter boundaries, with heights and openings made to your drawing.
View specifications →
Hot dip galvanised
Double twisted mesh (Shyama Jali)
2.0 to 2.2 mm wire, openings of 60 × 80, 80 × 100 and 100 × 120 mm, heights up to 1.5 m.
View specifications →
GI
Barbed wire
2.0 to 2.5 mm wire, barbs every 3 to 5 inches, 100 to 500 m per roll.
View specifications →
Hot dip galvanised
Concertina coil
2.5 mm high tensile core wire, coil diameters from 450 to 1050 mm.
View specifications →
Standards explained
Indian Standards, explained by the manufacturer
What each standard requires, the latest edition and its certification status, and how to write it into a purchase order. Written by a manufacturer with 31 years on the plant floor. See all standards.
IS 2721:2025
Chain link fence fabric
The 2025 revision, wire and coating, mesh tolerances, selvage types and acceptance tests.
Read the standard →
IS 4948:2020
Welded wire mesh for general use
Weld shear strength, tolerances and finish, and where IS 4948 stops and IS 1566 begins.
Read the standard →
IS 278:2009
Galvanized barbed wire
Type A and B, the six size designations, mass per metre and the 2024 Quality Control Order.
Read the standard →
IS 1566:1982
Fabric for concrete reinforcement
Hard drawn wire fabric, tolerances, tests, mass calculation and the Quality Control Order.
Read the standard →
IS 16014:2024
Gabions and revet mattresses
Coating classes, mesh types, wire diameters, zinc and polymer coatings and panel tests.
Read the standard →
Size it, weigh it and specify it
before you place the order.
Downloads
Downloads and quality documents
Documents for your vendor file and technical approval.
PDF · 2 MB
Product brochure
Our wire mesh and fencing range in one document, for your vendor file.
Download brochure →
ISO 9001:2015
Quality certificate
Our quality management system is certified to ISO 9001:2015, certificate no. CCPL/QMS/B1251.
View certificates →
With every lot
Wire mill test certificate
The mill test certificate (MTC) for the wire is supplied with every lot we dispatch.
Ask our sales team →
Questions
Frequently asked questions
They are theoretical weights based on nominal wire diameter and aperture. Actual weight varies within manufacturing tolerance, and weldmesh is invoiced on its actual weighed quantity.
Our welded wire mesh is manufactured to IS 4948 and our chain link fence to IS 2721:2003. Our quality management system is certified to ISO 9001:2015, certificate no. CCPL/QMS/B1251.
Yes. The wire mill test certificate (MTC) is supplied with every lot.
Welded mesh in 1.6 to 4.0 mm wire, chain link fence in 14 to 8 SWG (2.0 to 4.0 mm), and barbed wire in 2.0 to 2.5 mm. Other sizes are made to order.
Yes. Share the tender specification or BOQ and we will confirm the manufacturable size before quoting.
Yes. Share your site, boundary length and purpose on WhatsApp or through the quote form, and our sales team will recommend the mesh, wire gauge and finish.
Send us your specification
Share the product, wire gauge, opening, roll size, quantity and delivery location, or your tender specification. Our sales team will confirm the manufacturable size and send a quotation.