MM Industries

Home › Resources › Standards › IS 4948

Indian Standard explained

IS 4948 explained:
welded wire mesh

What the Indian Standard for welded steel wire fabric for general use requires, where it stops, and how to specify weldmesh for fencing, grills, cages and crates. Written by MM Industries, manufacturing weldmesh to IS 4948 in Raipur since 1995.

Weldmesh made to IS 4948 · ISO 9001:2015 certified plant

At a glance

Current editionIS 4948:2020 (Third Revision), with Amendment No. 1 of 2021
Official titleWelded Steel Wire Fabric for General Use — Specification
In forceIS 4948:2002 withdrawn after 2 August 2021
ScopeFencing, window grills, crates and similar general uses
Not coveredFabric for concrete reinforcement, which falls under IS 1566
BIS committeeMED 10, Wire Ropes and Wire Products
CertificationVoluntary. BIS lists no Quality Control Order for this product at the time of writing

Quick answer

IS 4948 is the Bureau of Indian Standards specification for welded steel wire fabric for general use, such as fencing, window grills and crates. The current edition is IS 4948:2020, the third revision, which replaced the 2002 edition from August 2021 and was amended in 2021. It covers mild steel and stainless steel wire fabric in sheets or rolls, with wires welded at every intersection, a mesh tolerance of 5 percent and a minimum average weld shear strength of 21 kg/mm². It does not cover fabric for concrete reinforcement, which is IS 1566.

Scope

What IS 4948 covers

IS 4948 covers welded steel wire fabric made from mild steel or stainless steel wire, laid at right angles and electrically welded at every intersection. It is written for general uses such as fencing, window grills and crates, and the standard leaves wire size and mesh to the purchaser.

The standard is deliberately silent on structural concrete. Fabric that is cast into concrete as reinforcement is governed by IS 1566, a different standard with different wire, different tests and, since 2021, a Quality Control Order. Knowing which of the two your project needs is the first decision in any weldmesh purchase.

Latest status

Which edition is current

DateEvent
2002Second revision of IS 4948 published
2020Third revision, IS 4948:2020, published
2 August 2021Last date for implementing IS 4948:2020. The 2002 edition stands withdrawn after this date
August 2021BIS issues a revised product manual for IS 4948:2020 incorporating Amendment No. 1

Cite IS 4948:2020 in new orders. A reference to IS 4948:2002 points to a withdrawn edition.

Related new standard

BIS has also published IS 19363:2025, a separate specification for metallic or polymer coated welded wire mesh fencing. Where a tender asks for coated welded mesh fence panels, check whether it cites IS 19363 rather than IS 4948, because the requirements differ.

Requirements

Key requirements of the standard

Material

  • Mild steel wire to IS 280.
  • Stainless steel wire to grade X04Cr17Ni12Mo2 or X04Cr18Ni10 of IS 6528.
  • Supply in flat sheets or rolls, in square or oblong mesh.

Construction and tolerances

ParameterRequirement
WeldingLongitudinal and transverse wires welded at every intersection
Mesh size± 5 percent, centre to centre
Sheet or roll length25 mm or 1 percent, whichever is greater
Wire diameter and meshAs specified by the purchaser at order

Sources: BIS summary of IS 4948:2020 and IS 4948:2002, clause 5.

Weld shear strength

The weld is the critical point in welded mesh, so the standard tests it directly. The minimum average weld shear strength is 21 kg/mm², calculated on the area of the longitudinal wire. Four welds are selected at random, excluding the selvage wire, and the test is repeated for every 30,000 m² of fabric.

Fabric where the longitudinal and transverse wires differ in diameter by more than 2 mm is excluded from the weld shear test.

Finish

Fabric must be free of rust, mill scale, dirt and oil. Where the purchaser requires corrosion protection, the standard recognises hot dip galvanizing, painting and phosphating. The finish must be stated in the order; it is not assumed.

Marking on every bundle

  • Manufacturer’s name or trademark
  • Material description
  • Mesh size
  • Longitudinal and transverse wire diameters
  • Width and length
  • The BIS Standard Mark, only where the manufacturer holds a BIS licence for the product

Choosing the standard

IS 4948, IS 1566 or IS 19363: which applies?

Your useStandardQuality Control Order
Fencing, grills, cages, crates, partitionsIS 4948:2020No
Mesh cast into concrete as reinforcementIS 1566:1982Yes, since 2021
Metallic or polymer coated welded mesh fencingIS 19363:2025Check the current listing

Read IS 1566 for structural concrete work: IS 1566 explained.

For buyers

How to specify IS 4948 weldmesh

IS 4948 leaves wire size, mesh and finish to the purchaser, so the order has to carry them. This is the checklist our team uses.

  • Cite IS 4948:2020.
  • Material: mild steel to IS 280, or the stainless grade.
  • Wire diameter in millimetres for both directions.
  • Mesh size centre to centre in both directions, for example 50 × 50 mm or 75 × 25 mm.
  • Form: rolls or flat sheets, with width and length.
  • Finish: galvanized, painted, phosphated or plain.
  • Weld shear test report and the wire mill test certificate.
  • Whether the BIS Standard Mark is required.

From the plant floor

Weight is the quickest check on delivered weldmesh. Underweight mesh almost always means thinner wire than ordered. Check the theoretical weight of any size with our welded mesh weight calculator before you order, then weigh at receipt.

Our practice

How we manufacture to IS 4948

MM Industries manufactures GI and MS welded wire mesh to IS 4948 at our plant on NH 43, Raipur, in production since 1995. Our range covers 1.6 to 4.0 mm wire, apertures from 25 × 25 to 150 × 150 mm in square or rectangular mesh, in rolls and panels up to 2 m wide. Our quality management system is certified to ISO 9001:2015, and the wire mill test certificate is supplied with every lot.

Because IS 4948 leaves the size to the buyer, we confirm the wire diameter, aperture and finish in writing before production starts. That confirmation becomes the basis for inspection at delivery.

Questions

Frequently asked questions

IS 4948:2020, the third revision, amended in 2021. The 2002 edition was withdrawn after 2 August 2021.

BIS lists no Quality Control Order for welded steel wire fabric for general use at the time of writing, so certification is voluntary. A tender may still require the ISI mark.

IS 4948 states that it does not cover fabric for concrete reinforcement. Reinforcement fabric is governed by IS 1566, which is covered by a Quality Control Order. Tell us the end use at enquiry and we will confirm the right specification.

A minimum average weld shear strength of 21 kg/mm², calculated on the longitudinal wire area, tested on four random welds per 30,000 m² of fabric.

Five percent between any two members, centre to centre. Sheet or roll length may vary by 25 mm or 1 percent, whichever is greater.

Yes. Stainless steel wire must be grade X04Cr17Ni12Mo2 or X04Cr18Ni10 of IS 6528.

Send us your weldmesh specification

Share the wire diameter, aperture, finish, roll or panel size and quantity, or your tender clause. Our team will confirm the construction against IS 4948 and send a quotation.