MM Industries

Home › Resources › Standards › IS 278

Indian Standard explained

IS 278 explained:
galvanized barbed wire

Types, size designations, barb spacing, mass per metre, tests and the Quality Control Order that covers galvanized barbed wire in India. Written by MM Industries, manufacturing fencing products in Raipur since 1995.

Manufacturer since 1995 · ISO 9001:2015 certified plant

At a glance

Current editionIS 278:2009 (Fourth Revision)
Official titleGalvanized Steel Barbed Wire for Fencing — Specification
Last reviewed2020, by the MED 10 committee
Quality Control OrderSteel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024
QCO in force1 December 2024 for medium and large units, 1 March 2025 for small, 1 June 2025 for micro enterprises
BIS committeeMED 10, Wire Ropes and Wire Products

Quick answer

IS 278:2009 is the Bureau of Indian Standards specification for galvanized steel barbed wire for fencing. It defines two types, Type A (Iowa) and Type B (Glidden), six size designations built from 2.50 or 2.24 mm line wire and 2.50 or 2.00 mm point wire, barbs at 75 or 150 mm spacing, and the tensile, breaking load, wrapping and zinc coating tests. Galvanized barbed wire is also listed in the 2024 Quality Control Order for wire and wire mesh products.

Construction

Type A and Type B barbed wire

Barbed wire under IS 278 is made by twisting two line wires together, with one or both carrying the barbs. Every barb has four points. The two types differ only in how the point wire is wrapped.

TypeBarb construction
Type A (Iowa)Two point wires twisted around both line wires
Type B (Glidden)Two point wires twisted around one line wire
  • Barb length of 13 to 18 mm.
  • Barb points set at no more than 35 degrees to the axis of the barb forming wire, and as far as possible at right angles to each other.
  • Line wire with no joints except welds made in the rod before drawing, at least 15 m apart. No splicing is permitted.

Sizes

Size designations and mass per metre

Mass per metre is the figure that decides how far a reel goes on site and the first check on whether the wire is to size.

SizeLine wire (mm)Point wire (mm)Barb spacing (mm)Mass (g/m)Approx. metres per kg
Size 12.50 ± 0.082.50 ± 0.0875 ± 12136 to 1556.5 to 7.4
Size 22.50 ± 0.082.50 ± 0.08150 ± 12108 to 1208.3 to 9.3
Size 32.50 ± 0.082.00 ± 0.0875 ± 12108 to 1258.0 to 9.3
Size 42.50 ± 0.082.00 ± 0.08150 ± 1289 to 1039.7 to 11.2
Size 52.24 ± 0.082.00 ± 0.0875 ± 1297 to 1069.4 to 10.3
Size 62.24 ± 0.082.00 ± 0.08150 ± 1278 to 8511.8 to 12.8

Mass is total reel mass divided by length. The standard allows 2 to 7 lays (twists) between barbs. Metres per kg is calculated from the mass limits. Source: IS 278:2009, Table 1.

A barbed wire is designated by type and size number, for example Steel Barbed Wire, A-1 IS 278 for Type A in size 1.

Acceptance

Material and tests

  • Line wire and point wire are mild steel wire to IS 280.
  • Zinc coating to IS 4826 (hot dip) or IS 12753 (electrogalvanized), of the type agreed with the purchaser. An optional chromate conversion coating to IS 1340 may be applied.
  • Point wire is tested for zinc mass before fabrication and must meet the medium coated requirement, reduced by no more than 15 percent.
TestRequirement
Line wire tensile strength390 to 590 N/mm²
Breaking load of finished barbed wire, 2.50 mm line wireAt least 3.7 kN
Breaking load of finished barbed wire, 2.24 mm line wireAt least 3.0 kN
Wrapping (line wire)Eight turns around its own diameter and unwrapped, without fracture
Zinc coatingAs agreed under IS 4826 or IS 12753

Source: IS 278:2009, clause 12.

Sampling and marking

Reels in the lotReels selected
Up to 253
26 to 504
51 to 1505
151 to 3007
301 and above10

A lot that fails is subject to 100 percent retesting. Source: IS 278:2009, Annex A.

Each reel must be marked with the manufacturer’s name, the type, line and point wire diameters, barb spacing, and the barb length or reel mass. Reels supplied under a BIS licence also carry the Standard Mark.

Regulation

The 2024 Quality Control Order

The Department for Promotion of Industry and Internal Trade issued the Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024 on 3 July 2024. It lists IS 278:2009 among the wire and wire mesh products it covers. The order came into force on 1 December 2024 for medium and large manufacturers, on 1 March 2025 for small enterprises and on 1 June 2025 for micro enterprises. Goods made in India for export are exempt.

In practice, cite IS 278:2009 and the designation in the purchase order, and ask for test results for breaking load and zinc coating with each lot.

For buyers

How to specify IS 278 barbed wire

  • Cite IS 278:2009 and the designation, for example A-1 or B-4.
  • Type: A (Iowa) or B (Glidden).
  • Size number, which fixes line wire, point wire and barb spacing.
  • Zinc coating type under IS 4826 or IS 12753.
  • Reel length or reel mass, and the number of reels.
  • Test results for line wire tensile strength, breaking load and zinc coating with each lot.

From the plant floor

To size an order, multiply the fence length by the number of strands, add an allowance for tying off at the straining posts, then divide by the metres per kg for your size in the table above. That gives the kilograms to order.

Questions

Frequently asked questions

Yes. Galvanized steel barbed wire to IS 278 is listed in the Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024. The order applied from 1 December 2024 for medium and large units, 1 March 2025 for small and 1 June 2025 for micro enterprises.

In Type A (Iowa) the point wires are twisted around both line wires. In Type B (Glidden) they are twisted around one line wire. Both have four point barbs.

Either 75 mm or 150 mm, each with a tolerance of ± 12 mm, depending on the size designation.

Between about 6.5 and 12.8 metres, depending on the size. Size 1 (2.50 mm wires, 75 mm spacing) gives about 6.5 to 7.4 m per kg; size 6 (2.24 mm line wire, 150 mm spacing) gives about 11.8 to 12.8 m per kg.

At least 3.7 kN for barbed wire with 2.50 mm line wire, and at least 3.0 kN with 2.24 mm line wire.

Yes. IS 278:2009, the fourth revision, was last reviewed in 2020 and remains in force.

Send us your barbed wire requirement

Share the type, size designation, quantity and delivery location, or your tender clause. Our team will confirm what we supply against IS 278 and send a quotation.