MM Industries

Home › Resources › Standards

Indian Standards explained

Wire mesh and fencing
standards explained

The Indian Standards that govern chain link fence, welded mesh, barbed wire, reinforcement fabric and gabions: what each covers, its current edition and where it sits under Quality Control Orders. Written by MM Industries, manufacturing in Raipur since 1995.

Manufacturer since 1995 · ISO 9001:2015 certified plant

At a glance

Standards covered5
Quality Control OrderIS 278, IS 1566, IS 16014
No Quality Control OrderIS 2721, IS 4948
Status checked20 November 2026

Quick answer

Five Indian Standards cover most wire mesh and fencing supply in India. IS 2721 covers chain link fence fabric, IS 4948 welded wire mesh for general use, IS 278 galvanized barbed wire, IS 1566 welded fabric for concrete reinforcement and IS 16014 double twisted gabions and revet mattresses. IS 278, IS 1566 and IS 16014 are covered by Quality Control Orders; IS 2721 and IS 4948 are not.

Reference

The five standards at a glance

StandardProductCurrent editionQuality Control Order
IS 2721Chain link fence fabricIS 2721:2025Not covered
IS 4948Welded wire mesh for general useIS 4948:2020Not covered
IS 278Galvanized barbed wireIS 278:2009Covered by the 2024 order
IS 1566Hard drawn steel wire fabric for concrete reinforcementIS 1566:1982Covered since 26 February 2021
IS 16014Double twisted gabions, revet mattresses and rock fall nettingIS 16014:2024Covered by the 2024 order

Status checked on 20 November 2026. Each linked page gives the dates, the key clauses and a purchase order checklist.

Regulation

Quality Control Orders and the standards

Three of these products are listed under Quality Control Orders issued by the Department for Promotion of Industry and Internal Trade. Galvanized barbed wire and double twisted gabions are listed in the Steel Wires or Strands, Nylon or Wire Ropes and Wire Mesh (Quality Control) Order, 2024, in force from 1 December 2024 for medium and large manufacturers. Hard drawn wire fabric for concrete reinforcement has been under a Quality Control Order since 26 February 2021.

For every product on this page, the standard defines what you are buying: the wire, the coating, the dimensions, the tests and the marking. Cite the standard with its year in the purchase order, and ask for the test reports that show each requirement is met.

From the plant floor

Ask for the wire mill test certificate and the lot test report with every supply. Together they show the wire, coating and dimensions meet the standard.

For buyers

Using a standard in a tender

  • Cite the standard with its year, for example IS 2721:2025, so nothing can be supplied against a withdrawn edition.
  • State what the standard leaves to the purchaser: wire diameter in millimetres, mesh or aperture, coating and dimensions.
  • Name the documents you need at delivery: wire mill test certificate, lot test report and marking as per the standard.

Questions

Frequently asked questions

Galvanized barbed wire (IS 278), double twisted gabions and revet mattresses (IS 16014) and hard drawn wire fabric for concrete reinforcement (IS 1566) are covered by Quality Control Orders. Chain link fence (IS 2721) and welded mesh for general use (IS 4948) are not, at the time of writing.

IS 1566, not IS 4948. IS 4948 covers welded fabric for general uses such as fencing and grills, and states that it does not cover concrete reinforcement.

Yes, until 10 June 2027. IS 2721:2025 is the current edition, and BIS has extended the withdrawal of the 2003 edition from 10 June 2026 to 10 June 2027.

Standards are revised. Citing the year, such as IS 16014:2024, fixes the requirements both sides work to and prevents supply against a withdrawn edition.

Send us your tender clause

Share the standard your tender cites, with sizes and quantity. Our team will confirm what we supply against it before quoting.